Pumps
DWP
Briggs and Stratton
Honda
Kama
A motor pump is a constituted aggregate from an engine and a pump, mounted on a common chassis. They are mainly used in the garden, for activities related to water deficit or surplus. Thus, with with the help of such a machine you can get rid of unwanted water to prevent flooding, certain areas can be irrigated to increase production, various basins can be filled, etc.
General characteristics
Gardelina motor pumps are manufactured in Romania.
We offer a range of motor pumps that can be used in the following directions:
- Agricola - for sprinkler/drum/drip irrigation
- IGSU - extinguishing fires or pumping water from flooded areas
- Industrial – pumping hot water or pumping very dirty water.
- Drilling - pumping sandy water with abrasive and corrosive content.
The DWP models are of medium capacity and are equipped with the following engines: Honda, Kama, Briggs & Stratton and KAMA (Diesel).
Large capacity motor pumps are equipped with Kohler (Italy) or Yavuz motors (Turkey)
The alloy of the pump body and its coupling elements are cast from cast iron has an increased degree of resistance both for mechanical shocks and resistance to corrosions.
Term of use minimum 10 years.
Motor pumps in our portfolio are divided into two large categories:
- 1. Motor pumps of medium capacity
- 2. Large capacity motor pumps
Motor pumps of medium capacity:
Gasoline models:
Pressure motor pumps
- Engine: HONDA, 4-stroke, OHV, with horizontal shaft
- Maximum flow: 61 m3 /h
- Maximum pressure: 8.2 bars
- Suction/discharge diameter: 3" (75 mm)
- Engine: KAMA
- Maximum flow rate: 61M3/H
- Maximum pressure: 8.2 Bar
- Suction/discharge diameter: 3" (75/75mm)
- Engine: BRIGGS&STRATTON
- Maximum flow: 62 m3 / h
- Maximum pressure: 8.2 bars
- Suction/discharge diameter: 3" (75/75mm)
- Engine: Honda
- Maximum flow rate: 66M3/ hour
- Maximum pressure: 7.5 Bar
- Suction/discharge diameter: 4" (100 mm) / 3" (75 mm)
- Engine: KAMA
- Maximum flow: 66 cubic meters / hour
- Maximum pressure: 7.5 bars
- Suction/discharge diameter: 4 " / 3''
- Engine: BRIGSS & STRATTON
- Maximum flow: 68 m3 / hour
- Maximum pressure: 7.5 bars
- Suction/discharge diameter: 4"/ 3"
Flow motor pumps for dirty water
- Engine: Honda
- Maximum flow rate: 129 m3/hour (granulometry 33 mm)
- Maximum pressure: 3 bars
- Suction/discharge diameter: 4'' / 4''
- Engine: KAMA
- Maximum flow rate: 129M3/Hour
- Maximum pressure: 3 bars
- Suction/discharge diameter: 4'' / 4''
- Engine: Briggs & Stratton
- Maximum flow rate: 129M3/Hour
- Maximum pressure: 3 bars
- Suction/discharge diameter: 4'' / 4''
Diesel models:
- Engine: KAMA
- Maximum flow rate: 59 M3/Hour
- Maximum pressure: 8 Bar
- Suction/discharge diameter: 75/75mm
- Engine: KAMA
- Maximum flow rate: 66Mc/hour
- Maximum pressure: 6.6 Bar
- Suction/discharge diameter: 4" (100 mm) / 3" (75 mm)
- Engine: KAMA
- Maximum flow: 128 m3 / h
- Maximum pressure: 3 Bar
- Suction/discharge diameter: 100 / 100 mm
Large capacity motor pumps:
- Engine: KOHLER
- Maximum flow: 350 m3/h
- Maximum pressure: 4.5 bars
- Suction/discharge diameter: 125 mm
- Engine: KOHLER
- Maximum flow rate: 170 m3/h
- Maximum pressure: 9.3 bars
- Suction/discharge diameter: 125 mm / 100 mm
- Engine: YAVUZ
- Maximum flow: 230 m3/ hour 2100 rpm
- Maximum pressure: 9 bar 2100 rpm
- Suction/discharge diameter: 125 mm
- Engine: YAVUZ
- Maximum flow: 500 m3 / hour 2000 rpm
- Maximum pressure: 4.5 bar 2000 rpm
- Suction/discharge diameter: 150 mm
- Engine: KOHLER
- Maximum flow: 160 m3 / hour
- Maximum pressure: 14 bars
- Suction/discharge diameter: 125 mm / 100 mm
- Engine: KOHLER
- Maximum flow: 400 mc/h
- Pressure: 3 bars
- Suction/discharge diameter: 150 mm
- Engine: KOHLER
- Maximum flow: 500 m3/hour
- Maximum pressure: 4.7 bars
- Suction/discharge diameter: 150 mm
Motor pumps: DWP 390 H4X / DWP 390 K4X / DWP 420 BS4X are pumps self-priming, which stands out for its low fuel consumption. It is equipped with a suction retaining valve in the pump body. Its purpose is to self-priming when starting the motor pump. It has a frame for transport and protection, being very resistance due to the construction of stainless aluminum cast under pressure
Standards used: SR EN 809+ A1:2010/ AC:2010.
-
Phone support
-
Warranty Service
Post-warranty Service -
Technical manuals
See the latest Offers
